INA ZKLR1035-2Z bearing

All our bearing ensure quality

please contact Email for any inquiry sales@tanchin.hk INA ZKLR1035-2Z

d:   10                Tolerance: -0,008

D:   28,14                Tolerance: +0,03 / -0,01

H:   17,5                Tolerance: -0,5

M_RL:   0,12         Bearing frictional torque

r_min:   0,3           

d₂:   4,5           

n_{G Fett}:   5100         Limiting speed for grease lubrication

n:   26           

C_0a:   2420         Basic static load rating, axial

C_0r:   3600         Basic static load rating, radial

m:   50         Mass

  ZM10  :   ZM10         Designation of recommended INA locknut
The locknut is used to axially locate the bearing unit. It has no influence on the bearing preload.

A₁:   35           

M_A:   6         Tightening torque
Only valid in conjunction with INA precision locknuts

D_{aa min}:   26           

d_a:   12,4           

B:   16         Tolerance: +0,25

d₁:   14,7           

  4 x M4  :   4 x M4         Quantity x size of fixing screws to DIN 912
Tightening torque of fixing screws according to manufacturers data.
Screws not included in delivery.

  7  :   7         Axial runout
The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.

C_a:   2550         Basic dynamic load rating, axial

m:   26           

c_aL:   26         Axial rigidity
Statistically determined mean values from measurements on the complete bearing.

D_ai:   22           

:        Locknuts must be ordered separately.

C_r:   7400         Basic dynamic load rating, radial

A₂:   35           

X:        Axial abutment area of outer ring

M_m:   0,0075         Mass moment of inertia for rotating inner rings

Type:   INA Bearings for screw drives