INA ZKLR2060-2RS bearing

All our bearing ensure quality

please contact Email for any inquiry sales@tanchin.hk INA ZKLR2060-2RS

d:   20                Tolerance: -0,008

D:   50,45                Tolerance: +0,03 / -0,01

H:   30                Tolerance: -0,5

r_min:   0,3           

  8  :   8         Axial runout
The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.

m:   300         Mass

D_ai:   39           

C_a:   27500         Basic dynamic load rating, axial

C_0r:   19100         Basic static load rating, radial

M_m:   0,263         Mass moment of inertia for rotating inner rings

B:   28         Tolerance: +0,25

n_{G Fett}:   2800         Limiting speed for grease lubrication

C_r:   28000         Basic dynamic load rating, radial

c_aL:   250         Axial rigidity
Statistically determined mean values from measurements on the complete bearing.

A₂:   60           

X:        Axial abutment area of outer ring

:        Locknuts must be ordered separately.

d_a:   24           

n:   47           

D_{aa min}:   47           

C_0a:   40000         Basic static load rating, axial

d₂:   6,6           

d₁:   24,4           

  4 x M6  :   4 x M6         Quantity x size of fixing screws to DIN 912
Tightening torque of fixing screws according to manufacturers data.
Screws not included in delivery.

m:   47           

  ZM20  :   ZM20         Designation of recommended INA locknut
The locknut is used to axially locate the bearing unit. It has no influence on the bearing preload.

A₁:   60           

M_RL:   0,3         Bearing frictional torque

M_A:   18         Tightening torque
Only valid in conjunction with INA precision locknuts

Type:   INA Bearings for screw drives