please contact sales@tanchin.hk for any inquiry
I also sell: BRI243720 bearing NA49 / 28 bearing 7328CDT bearing BT2B332752 bearing 4T-15102/15245 bearing 389A / 382A bearing ZKLF3590.2Z bearing K25X30X20 bearing LHSA14 bearing 81264 bearing NK65 / 35A bearing 23138CCK / W33 + H3138 bearing W689Z bearing 7201AC / DF Bearing NJ332 + HJ332 bearing
   
【7219CDB bearings】 size parameters Specifications:
Bearing type: 7219CDB bearing
Inner diameter: 95
Outside diameter: 170
Thickness: 32
Bearing series: angular contact ball bearings
Bearing Brand: NSK Bearings
Spot imported TIMKEN bearings imported
   Angular contact ball bearings are: 7000C type (α = 15 °), 7000AC type (α = 25 °) and 7000B (α = 40 °) several types. The bearing of the lock on the outer ring, the general inner and outer ring can not be separated, can withstand radial and axial joint load and a direction of the axial load. The ability to withstand axial loads is determined by the contact angle, and the greater the contact angle, the higher the ability to withstand axial loads. The bearing can limit the axial displacement of the shaft or housing in one direction.
   The bearing speed of the contact ball bearing is high, and it can bear both the radial load and the axial load. It can also bear the pure axial load. The axial load capacity is determined by the contact angle and increases with the contact angle.
   Nsk bearing vibration
   Nsk bearing vibration is sensitive to bearing damage, such as peeling, indentation, corrosion, cracks, wear, etc. will be reflected in the bearing vibration measurement, so by using a special bearing vibration measuring device (frequency analyzer, etc.) can be measured The size of the vibration, through the frequency can not be inferred from the specific circumstances of the exception. The measured values are different depending on the conditions of use of the bearings or the location of the sensor installation. Therefore, it is necessary to determine the judgment criteria after analyzing and comparing the measured values of each machine in advance.
   We recommend the following models: PWM110125100 bearing NF316 bearing 7238C bearing NU1012 bearing SONL230-530 bearing IRT1222-1 bearing 3322 bearing 22322EW33K + H2322 bearing NK15 / 20 bearing 65500 bearing 7219CDB bearing
   I also recommend 7219CDB bearing for your use: box drying equipment, desulfurization and dust removal equipment, boiling dryer, garbage trucks, drying equipment, excavators, concrete mixers, traffic, mixer, wire drawing machine, and other purposes.


please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement        

F682X F692X F602 F694Z F695Z F696Z F697Z F698Z F699Z F604Z F605Z F606Z F607Z F608Z F624Z 6032DU 6030V 625VV 6032DDU 626DD