please contact sales@tanchin.hk for any inquiry
I also sell: 7328B.UO bearing C2212KTN9 bearing 2216K bearing YAT206-104 bearing 71928C bearings GE300-DO-2RS Bearing 16006 Bearing 6016-RS bearing FR168B bearing CR100044 bearing RNA4840 bearing 918 bearing E30217J NF413 bearing bearing bearing 23284CAE4
   Shanghai Shanghai NSK Bearings 6030ZZ bearing NSK sample diagram
[NSK 6030ZZ bearing Specifications] Size:
Bearing type: 6030ZZ Bearings
Inner diameter: 150 mm
Outside diameter: 225 mm
Thickness: 35 mm
Bearings: deep groove ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported German INA Bearing
   Size range
    Inner diameter range: 10mm ~ 1320mm diameter size range: 30mm ~ 1600mm Width range: 9mm ~ 300 mm
tolerance
    Standard deep groove ball bearings with a general level, all consistent with GB307.1.
Clearance
    Standard deep groove ball bearings with C2, standard (CN), C3, C4 and C5 level internal clearance, all with GB4604 consistent.
Cage
    Deep groove ball bearings generally use steel stamping cage or brass cage. When the outer diameter of less than 400 mm, the use of steel stamping cage without post code, when an outer diameter greater than 400 mm multi-use solid brass cage without post code
   We recommend the following models: C4126-2CS5V QJ307 bearing bearing 3659/3620 Bearing B7238E.T.P4S.UL bearing C2228K bearing 7952DB bearing 7301B / DB bearing bearing 7214CDF 71912CE / P4A Bearing TLA1412Z bearing 6820N bearing NSK 6030ZZ bearing bearing NU306E
   I also recommend NSK 6030ZZ bearing purposes: trash, pneumatic mixer, piling machine, blasting equipment, steel cutting machine, natural draft cooling towers, universal printer, ironing machine, closed cooling tower, complex machine, system brick machinery, cylindrical gear reducer, printer, process test machine, wear pumps, and other purposes.
   nsk bearing lubrication:
   Oil bath 1. NSK Bearings smooth
    Smooth oil bath is the most common NSK bearings smooth manner, suitable for low, medium-speed bearing smooth. The NSK Bearings by a local dip tank, lubricating oil by the rotating bearing parts brought up, and then flow back into the oil tank should be slightly lower than the lowest rolling element center.
   2. NSK Bearings drip smooth
    Suitable drip smooth need constant supply lubricating oil was NSK bearing member, the amount of the individual drip drop every 3-8 seconds is appropriate, too much oil will cause the bearing temperature increased.
   Cycle oil smooth 3. NSK Bearings
    The filtered oil pump oil recommended for admission to NSK bearing member through the bearing lubricating oil filtered again after cooling use. Because circulating oil heat can be taken away, the bearing cooling, therefore the method useful in high speed bearing member.
   4. NSK Bearings smooth spray
    With dry air through the contraction of smooth oil sprayer and mist mixed result, radioactive NSK bearings, air bearings can effectively cool and avoid intrusion of impurities. This method is suitable for high-speed, low-temperature smooth bearing member.
   5. NSK Bearings smooth radiation
    The low-pressure oil pump oil through the nozzle strikes NSK bearings, bearing the incident through the other end of the bearing oil flowing into the oil sump. In the high-speed rotation of the bearing, rolling elements and maintain aircraft also commensurate with the high rotational speed so that the ambient air stream caused by an individual is difficult to smooth the way lubricating oil to the bearings, then must use low-pressure radiation will smooth the way oil spray to the bearing, the nozzle position should be placed between the inner and maintain the central rack.


please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement