please contact sales@tanchin.hk for any inquiry
The standard essential components of a ball bearing are defined as follows:
Inner Ring: The Inner Ring is the smaller of the two bearing rings. ...
Outer Ring: The Outer Ring is the larger of the two bearing rings. ...
Balls: ...
Cage (Retainer)



Assembly
10 Now that all of the parts are made, the bearing needs to be put together. First, the inner race is put inside the outer race, only off to one side as far as possible. This makes a space between them on the opposite side large enough to insert balls between them. The required number of balls is put in, then the races are moved so that they are both centered, and the balls distributed evenly around the bearing. At this point, the cage is installed to hold the balls apart from each other. Plastic cages are usually just snapped in, while steel cages usually have to be put in and riveted together. Now that the bearing is assembled, it is coated with a rust preventative and packaged for shipping.

please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement        

6209-2RSR 6208-2RSR 6207-2RSR 6206-2RSR 6205-2RSR 6204-2RSR 6203-2RSR 6202-2RSR 6201-2RSR 6200-2RSR 629-2RSR 627-2RSR 626-2RSR 625-2RSR 624-2RSR 623-2RSR 6205-C 6204-C 6203-C 6202-C