please contact sales@tanchin.hk for any inquiry
I also sell: W628 / 5-2Z bearing RHE30 bearing 7914A5DT bearing 6215-2Z bearing NJ42M1 + HJ421 bearing 7222BECBY bearing RTUEY75 bearing 7206CDT bearing NUP305ECM bearing NNCF4952CV bearing NU2220E bearing 18204X / 18335X bearing 234721M.SP bearing 22326CCK / W33 + H2326 bearing 6213LLU bearing
   FAG Bearings Shanghai Bearing distributors NSK MR137
[] Dimensions Bearing NSK MR137 Specifications:
Bearing Type: MR137 bearings
Inner diameter: 7 mm
Outside diameter: 13 mm
Thickness: 3.0 mm
Bearings: miniature deep groove ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported German FAG Bearings

   We recommend the following models: NJ224-E-TVP2 + HJ224E bearing HM516447 / HM516410 bearing 5209ZZ bearing 32315BJ2 / QCL7C Bearings 239/530 bearing EE390095 / 390200 bearing NJ2340 Bearing 292 / 950EM bearings E-LM272249D / LM272210 / LM272210DG2 bearings 3217A-2RS NATV35PP bearing bearing bearing NSK MR137 bearing YAR209-108-2F
   I also recommend NSK MR137 bearings use: a plate column, inserted machine, stainless steel reactor, jumper machine, enamel reactor, shear pin machine, tank reactors, environmental protection and energy-saving equipment, fermentation extraction equipment, car muffler , closed reactor, noise reduction equipment, tubular reactor, reverse osmosis equipment, response equipment, and other purposes.
   nsk bearing installation:
    1. To install the front axle bearings, you must unplug the jacket bearing a fixed pin, while the journal surface clean and smooth, polished, and painted rust and lubricating oil (allowing a slight rotation of the shaft bearing) at the journal.
     2. In the housing and bearing with lubricant topcoat, the bearing into the bearing housing. Then the assembled bearings and NSK bearing sleeve along the shaft. Pushed to the desired position for installation.
    3. Fixed bearing bolts do not tighten, let the bearing housing can rotate in the bearing housing. Also installed the other end of the bearing housing and the same shaft of the shaft several turns to bearing automatic alignment position after itself. Then bearing bolt well.
    4. Mounted eccentric. First condom eccentric eccentric steps in the bearing housing, along the axis of rotation and hand tighten. Then insert a small iron bar or the eccentric sleeve against the sink hole. Hand direction of rotation along the axis of the percussion hammer small iron bar. The eccentric sleeve is securely installed, and finally locking socket head cap screws eccentric sleeve.

please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement