please contact sales@tanchin.hk for any inquiry
I also sell: OH32 / 900H bearings NU2236 bearing 6228DU bearing 1305 bearing bearing GBR283820 SYNT40FW bearing B7202C.T bearings 54418 + U418 bearings 30205-A bearing 6902N bearing TAF-172520 bearing 23160CCK / 33OH3160H bearing BT4B328842E1 / C725 SCE2816 bearing bearing bearing 16013
   Shenzhen FAG Bearing NSK 6009 bearing specifications
[NSK 6009 bearing Specifications] Size:
Bearing Type: Bearing 6009
Inner diameter: 45 mm
Outside diameter: 75 mm
Thickness: 16 mm
Bearings: deep groove ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported bearings Japan IKO
   Size range
    Inner diameter range: 10mm ~ 1320mm diameter size range: 30mm ~ 1600mm Width range: 9mm ~ 300 mm
tolerance
    Standard deep groove ball bearings with a general level, all consistent with GB307.1.
Clearance
    Standard deep groove ball bearings with C2, standard (CN), C3, C4 and C5 level internal clearance, all with GB4604 consistent.
Cage
    Deep groove ball bearings generally use steel stamping cage or brass cage. When the outer diameter of less than 400 mm, the use of steel stamping cage without post code, when an outer diameter greater than 400 mm multi-use solid brass cage without post code
   We recommend the following models: 23248BKMBH2348XHG bearings 7603035-TVP bearing 627 Bearing 6221-ZN bearing NJ2330 + HJ2330 bearing 6309-2Z / VA208 bearings GY1203-KRR-B-AS2 / V JL724348 bearing bearing 7326AC bearing N1892M2P / HB3 bearings B7048-ET -P4S bearings 82788/82720 bearings NSK 6009 bearing
   I also recommend NSK 6009 bearing purposes: mold temperature, dry powder mixing equipment, leather processing equipment, plastic pipe equipment, mixers, post-mortem cloth, plastic knitting machine, gravity gun, garment machinery and equipment, packaging machinery, electrostatic generation equipment, textile machinery parts, dryer, plating equipment, copper smelting equipment, and other purposes.
   nsk bearing lubrication:
   Oil bath 1. NSK Bearings smooth
    Smooth oil bath is the most common NSK Bearings in smooth manner, suitable for low and medium-speed bearing smooth. The NSK Bearings by a local dip tank, lubricating oil by the rotating bearing parts brought up, and then flow back into the oil tank should be slightly lower than the lowest rolling element center.
   2. NSK Bearings drip smooth
    Suitable drip smooth need constant supply lubricating oil was NSK bearing member, the amount of the individual drip drop every 3-8 seconds is appropriate, too much oil will cause the bearing temperature increased.
   Cycle oil smooth 3. NSK Bearings
    The filtered oil pump oil recommended for admission to NSK bearing member through the bearing lubricating oil and filtered after cooling use. Because circulating oil heat can be taken away, the bearing cooling, therefore the method useful in high speed bearing member.
   4. NSK Bearings smooth spray
    With dry air through the spray and the contraction of smooth oil mist mixed result, radioactive NSK bearings, air bearings can effectively cool and avoid intrusion of impurities. This method is suitable for high-speed, low-temperature smooth bearing member.
   5. NSK Bearings smooth radiation
    The low-pressure oil pump oil through the nozzle strikes NSK bearings, bearing the incident through the other end of the bearing oil flowing into the oil sump. When the high-speed rotating bearings, rolling elements and maintain aircraft also commensurate with the high rotational speed so that the ambient air stream caused by an individual is difficult to smooth the way lubricating oil to the bearings, then you must use low-pressure radiation will smooth the way oil spray to the bearing, the nozzle position should be placed between the inner and the maintenance of the central rack.


please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement