please contact sales@tanchin.hk for any inquiry
I also sell: 7001AC / DB bearing 294 / 600E.MB bearing SAF1513 bearing IRT1515-2 bearing 3208B bearing C31 / 530KM / HA3C4 bearing 23272EW33K + H3272 bearing 2219K + H319X bearing LL714649 / LL714610 bearing 23224C bearing HCB7002-CT-P4S bearing HJ326E bearings 61916-ZN bearing S7016ACD / P4A bearing 6202-RZ bearings
   Shanghai Shenzhen NSK Bearings NSK Bearings specifications 6009VV
[NSK 6009VV bearing Specifications] Size:
Bearing Type: 6009VV bearing
Inner diameter: 45 mm
Outside diameter: 75 mm
Thickness: 16 mm
Bearings: deep groove ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported Japanese NTN Bearing
   Deep groove ball bearings are most commonly used bearing. It's simple, easy to use. Mainly used to bear radial load, but increase the bearing radial clearance, with certain features of the angular contact ball bearings can withstand radial and axial load. When should not be used in high speed and thrust ball bearings, it can also be used to bear pure axial load. Deep groove ball bearings with the same sizes of other types of bearings, bearing friction coefficient is small, high speed limit. However, the impact of intolerance, not suitable to withstand heavy loads.
   We recommend the following models: 54406 + U406 bearings GE65-SW bearing 6003 bearing TAF-223016 bearing 23128CCK / 33OH3128H bearing 23044-2CS5 / VT143 bearings FT21 bearing 6320 bearing 6304-2RS bearing 23192EW33 bearing 2211EKTN9 + H311 bearing HCB7228-CT-P4S bearings bearing NSK 6009VV
   I also recommend NSK 6009VV bearing purposes: screw pump, electric welder, diaphragm, metal welding, explosion-proof pumps, AC welder, horizontal pumps, CNC welding machine, pump, rework station, chemical pumps, storage machines, vacuum pumps, spot welding, electric pumps, and other purposes.
   nsk bearing lubrication:
   Oil bath 1. NSK Bearings smooth
    Smooth oil bath is the most common NSK Bearings in smooth manner, suitable for low and medium-speed bearing smooth. The NSK Bearings by a local dip tank, lubricating oil by the rotating bearing parts brought up, and then flow back into the oil tank should be slightly lower than the lowest rolling element center.
   2. NSK Bearings drip smooth
    Suitable drip smooth need constant supply lubricating oil was NSK bearing member, the amount of the individual drip drop every 3-8 seconds is appropriate, too much oil will cause the bearing temperature increased.
   Cycle oil smooth 3. NSK Bearings
    The filtered oil pump oil recommended for admission to NSK bearing member through the bearing lubricating oil and filtered after cooling use. Because circulating oil heat can be taken away, the bearing cooling, therefore the method useful in high speed bearing member.
   4. NSK Bearings smooth spray
    With dry air through the spray and the contraction of smooth oil mist mixed result, radioactive NSK bearings, air bearings can effectively cool and avoid intrusion of impurities. This method is suitable for high-speed, low-temperature smooth bearing member.
   5. NSK Bearings smooth radiation
    The low-pressure oil pump oil through the nozzle strikes NSK bearings, bearing the incident through the other end of the bearing oil flowing into the oil sump. When the high-speed rotating bearings, rolling elements and maintain aircraft also commensurate with the high rotational speed so that the ambient air stream caused by an individual is difficult to smooth the way lubricating oil to the bearings, then you must use low-pressure radiation will smooth the way oil spray to the bearing, the nozzle position should be placed between the inner and the maintenance of the central rack.


please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement