please contact sales@tanchin.hk for any inquiry
I also sell: SYJ20TF bearing 46334 bearing 6032 bearing 7228ACD / DB bearing bearing 61938MA HCB7009-C-2RSD-T-P4S bearing HM88547 / HM88512 bearing HSS7013E.T.P4S.UL bearing C7020DB / P7 Bearing 71905C / DF Bearing BHAM912 bearing 6009N bearing bearing 24024C bearing 7003A5 bearing NJ210ECML
   FAG Bearing NSK 6314ZZ bearing distributor in Shenzhen
[NSK 6314ZZ bearing】 Size Specifications:
Bearing type: 6314ZZ Bearings
Inner diameter: 70 mm
Outside diameter: 150 mm
Thickness: 35 mm
Bearings: deep groove ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported bearings Japan IKO
   It is bearing the most common type. The basic model consists of a deep groove ball bearing outer ring, an inner ring, a steel ball and a group of holding structure into. Deep groove ball bearing types have single and double row two types of single row deep groove ball bearing type code for 6, double row deep groove ball bearings, code-named 4. Its structure is simple, easy to use, is the production of the most common and most widely used class of bearings.
   We recommend the following models: NJ2330E.M1 + HJ2330E bearing 331607A bearings 7002CDB bearing M541349 / M541310CD bearing 6209ZR bearing SYNT65LTF bearing NJ2306E bearing 129 bearing NJ334 bearings 30204-A bearing BRI365628UU bearing bearing NSK 6314ZZ bearing 7203A5DT
   I also recommend NSK 6314ZZ bearing use: kitchen equipment, flange, food and beverage processing equipment, pulleys, field operating machinery, workstations, coal mills, bending machines, drilling equipment, line cutting, sorting screen, evaporators, etching machines, mass transfer equipment, electronic products manufacturing equipment, and other purposes.
   nsk bearing lubrication:
   Oil bath 1. NSK Bearings smooth
    Smooth oil bath is the most common NSK Bearings in smooth manner, suitable for low and medium-speed bearing smooth. The NSK Bearings by a local dip tank, lubricating oil by the rotating bearing parts brought up, and then flow back into the oil tank should be slightly lower than the lowest rolling element center.
   2. NSK Bearings drip smooth
    Suitable drip smooth need constant supply lubricating oil was NSK bearing member, the amount of the individual drip drop every 3-8 seconds is appropriate, too much oil will cause the bearing temperature increased.
   Cycle oil smooth 3. NSK Bearings
    The filtered oil pump oil recommended for admission to NSK bearing member through the bearing lubricating oil and filtered after cooling use. Because circulating oil heat can be taken away, the bearing cooling, therefore the method useful in high speed bearing member.
   4. NSK Bearings smooth spray
    With dry air through the spray and the contraction of smooth oil mist mixed result, radioactive NSK bearings, air bearings can effectively cool and avoid intrusion of impurities. This method is suitable for high-speed, low-temperature smooth bearing member.
   5. NSK Bearings smooth radiation
    The low-pressure oil pump oil through the nozzle strikes NSK bearings, bearing the incident through the other end of the bearing oil flowing into the oil sump. When the high-speed rotating bearings, rolling elements and maintain aircraft also commensurate with the high rotational speed so that the ambient air stream caused by an individual is difficult to smooth the way lubricating oil to the bearings, then you must use low-pressure radiation will smooth the way oil spray to the bearing, the nozzle position should be placed between the inner and the maintenance of the central rack.


please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement