please contact sales@tanchin.hk for any inquiry
I also sell: NU1014ECM bearing 239509FA bearing NNU4196-M bearing 49175/49368 Bearing AXW20 bearing BFS8001 / HA4 bearings 6817LLU bearing 7013AC / DF bearings 6910B bearing 71903CD / HCP4A bearing NU352 bearing 7338B bearings NJ206 bearings EGW18-E40-B bearings bearing 6021VV
   NSK Bearing distributors _ Shenzhen 6315 bearing NSK sample diagram
[NSK 6315 bearing Specifications] Size:
Bearing Type: Bearing 6315
Inner diameter: 75 mm
Outside diameter: 160 mm
Thickness: 37 mm
Bearings: deep groove ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported Japanese NSK Bearings
   Deep groove ball bearings are most commonly used bearing. It's simple, easy to use. Mainly used to bear radial load, but increase the bearing radial clearance, with certain features of the angular contact ball bearings can withstand radial and axial load. When should not be used in high speed and thrust ball bearings, it can also be used to bear pure axial load. Deep groove ball bearings with the same sizes of other types of bearings, bearing friction coefficient is small, high speed limit. However, the impact of intolerance, not suitable to withstand heavy loads.
   We recommend the following models: 23152B bearing 16032 bearing bearing 1755/1730 Bearing NJ207 + HJ207 bearing F601XZZS NKIB5909 bearing HR30308J 61901-2RSR bearing bearing 7026AC / DT bearing CRY16VUUR bearing 71919FB / P7 Bearing NSK 6315 bearing bearing 22215RHKW33
   I also recommend NSK 6315 bearing purposes: health care auxiliary equipment, video machines, table, coaxial reducer, placement machine, magnetizing machine, chuck, worm reducer, Winder, stranding machines, treatment equipment, riveting equipment, flat, vertical reducer, inserted machine, pressing machine, and other purposes.
   nsk bearing installation:
    1. To install the front axle bearings, you must unplug the jacket bearing a fixed pin, while the journal surface polished smooth, clean and oiled rust and lubrication (bearings allow a slight rotation of the shaft) at the journal office.
     2. In the housing and bearing with lubricant topcoat, the bearing into the bearing housing. Then the assembled bearings and NSK bearing sleeve along the shaft. Pushed to the desired position for installation.
    3. Fixed bearing bolts do not tighten, let the bearing housing can rotate in the bearing housing. Also installed the other end of the bearing and the seat with a shaft, the shaft is rotated a few times, so that the bearing itself automatically after the alignment position. Then bearing bolt well.
    4. Mounted eccentric. First condom eccentric eccentric steps in the bearing sleeve, and hand along the direction of the rotating shaft and tighten. Then insert a small iron bar or the eccentric sleeve against the sink hole. Hand direction of rotation along the axis of the percussion hammer small iron bar. The eccentric sleeve is securely installed, and finally locking socket head cap screws eccentric sleeve.


please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement