please contact sales@tanchin.hk for any inquiry
I also sell: 7016AC / DB bearing 6020 bearing bearing 51144 bearing 66187 bearing 6314N bearing BCE2416 6216-RZ bearing 71812CD / P4A Bearing TAM1215 bearing 7332C bearing NK70 / 35 bearing NU319E bearings GE180-AX bearings 30306JR bearing 23156BKD1 + H3156 bearing
   NSK Bearing distributors _ 6815NR bearing NSK distributor Shenzhen
[NSK 6815NR bearing Specifications] Size:
Bearing Type: 6815NR bearing
Inner diameter: 75 mm
Outside diameter: 95 mm
Thickness: 10 mm
Bearings: deep groove ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported Japanese KOYO bearings
   Deep groove ball bearing structure is simple, easy to reach compared with other types of manufacturing high precision, so easily into a series of mass production, and lower manufacturing costs, the use of very common. In addition to the basic type deep groove ball bearings, there are all kinds of variations of structures, such as: deep groove ball bearings with dust cover, with rubber ring of deep groove ball bearings with snap ring groove deep groove ball bearings, have installed ball gap large load capacity of deep groove ball bearings, double row deep groove ball bearings.
   We recommend the following models: 7019C / DT bearing SDAF22540x7.1 / 4 bearings 4T-LM78349A / LM78310A bearing 44157 / 44363D bearing 02420 bearing FYT55TF / VA228 Bearing 694Z bearings 22215CCK / W33 bearing 33019 bearing bearing YEL207-105-2F RNA4876 bearings 7211B / DF bearing NSK 6815NR bearing
   I also recommend NSK 6815NR bearing purposes: environmental protection energy-saving equipment, worm reducer, noise reduction equipment, single-stage reducer, water softening equipment, do not block the pump, filter, hand pumps, sewage treatment equipment, Francis pumps, air purifiers, vortex pump, broken equipment, piston pumps, environmental equipment, and other purposes.
   nsk bearing lubrication:
   Oil bath 1. NSK Bearings smooth
    Smooth oil bath is the most common NSK Bearings in smooth manner, suitable for low and medium-speed bearing smooth. The NSK Bearings by a local dip tank, lubricating oil by the rotating bearing parts brought up, and then flow back into the oil tank should be slightly lower than the lowest rolling element center.
   2. NSK Bearings drip smooth
    Suitable drip smooth need constant supply lubricating oil was NSK bearing member, the amount of the individual drip drop every 3-8 seconds is appropriate, too much oil will cause the bearing temperature increased.
   Cycle oil smooth 3. NSK Bearings
    The filtered oil pump oil recommended for admission to NSK bearing member through the bearing lubricating oil and filtered after cooling use. Because circulating oil heat can be taken away, the bearing cooling, therefore the method useful in high speed bearing member.
   4. NSK Bearings smooth spray
    With dry air through the spray and the contraction of smooth oil mist mixed result, radioactive NSK bearings, air bearings can effectively cool and avoid intrusion of impurities. This method is suitable for high-speed, low-temperature smooth bearing member.
   5. NSK Bearings smooth radiation
    The low-pressure oil pump oil through the nozzle strikes NSK bearings, bearing the incident through the other end of the bearing oil flowing into the oil sump. When the high-speed rotating bearings, rolling elements and maintain aircraft also commensurate with the high rotational speed so that the ambient air stream caused by an individual is difficult to smooth the way lubricating oil to the bearings, then you must use low-pressure radiation will smooth the way oil spray to the bearing, the nozzle position should be placed between the inner and the maintenance of the central rack.



please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement