please contact sales@tanchin.hk for any inquiry
I also sell: NU10 / 800ECMA / HB1 bearings CSXC110 bearing 42690/42620-B bearings 31316.A100.140.N11CA bearing BT4B328727G / HA1VA901 Bearing 7324 Bearing 7310C / DB bearing bearing 6200ZN PWM160180180 bearings NJ317 bearings 7013C bearing NU313E bearing SAF1613 bearing IRT1525 -2 bearing 3209B bearings
   FAG bearings 6024NR bearing NSK distributor Shenzhen
[NSK 6024NR bearing Specifications] Size:
Bearing Type: 6024NR bearing
Inner diameter: 120 mm
Outside diameter: 180 mm
Thickness: 28 mm
Bearings: deep groove ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported Japanese NACHI bearings
   Deep groove ball bearings mounted on the shaft, the axial clearance in the bearing within the shaft or housing to limit the two directions of the axial displacement, it can be positioned in the bi-axial direction. In addition, the class also have some bearing self-aligning capability, when compared to shell hole tilt 2 'to 10', still work, but have a certain influence on bearing life. Deep groove ball bearing cage mostly steel stamping Ribbon Cage, a large multi-use vehicle system for metal bearing solid cage.
   We recommend the following models: LRT141717 bearing 21311CC bearing 23092RHAK + H3092 bearing GYE16-KRR-B bearings BL310 bearing 61913N bearing 6918DU bearing NCF28 / 850V K55X63X25 bearing bearing 55200 bearing 7203AC bearing 54204 bearing NSK 6024NR bearing
   I also recommend NSK 6024NR bearing purposes: other oil equipment, plate heat exchanger, drilling equipment, dephlegmator, chemical equipment parts, condensers, chemical molding equipment, coolers, chemical laboratory equipment, heaters, crushing equipment, accessories, recuperative heat exchanger, broken equipment, spiral plate heat exchanger, grinding machines, and other purposes.
   nsk bearing installation:
    1. To install the front axle bearings, you must unplug the jacket bearing a fixed pin, while the journal surface polished smooth, clean and oiled rust and lubrication (bearings allow a slight rotation of the shaft) at the journal office.
     2. In the housing and bearing with lubricant topcoat, the bearing into the bearing housing. Then the assembled bearings and NSK bearing sleeve along the shaft. Pushed to the desired position for installation.
    3. Fixed bearing bolts do not tighten, let the bearing housing can rotate in the bearing housing. Also installed the other end of the bearing and the seat with a shaft, the shaft is rotated a few times, so that the bearing itself automatically after the alignment position. Then bearing bolt well.
    4. Mounted eccentric. First condom eccentric eccentric steps in the bearing sleeve, and hand along the direction of the rotating shaft and tighten. Then insert a small iron bar or the eccentric sleeve against the sink hole. Hand direction of rotation along the axis of the percussion hammer small iron bar. The eccentric sleeve is securely installed, and finally locking socket head cap screws eccentric sleeve.

please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement