please contact sales@tanchin.hk for any inquiry
I also sell: 85KBE03 bearing 23280BKD1 bearing BR182620U bearing BTM60A / HCP4CDBB bearing 7006 bearing bearing NKX35Z 7913DB bearing 5304A-2RS1 bearing NU207E.TVP2 bearing 842 / 834D bearings RT735 Bearing 6322-Z bearing 32920JR bearings HS7006-ET-P4S bearing 22207ESK.TVPB bearing
   NSK Bearing distributors _ 6028DD bearing NSK distributor Shenzhen
[NSK 6028DD bearing Specifications] Size:
Bearing Type: 6028DD bearing
Inner diameter: 140 mm
Outside diameter: 210 mm
Thickness: 33 mm
Bearings: deep groove ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported Japanese KOYO bearings
   Deep groove ball bearings mounted on the shaft, the axial clearance in the bearing within the shaft or housing to limit the two directions of the axial displacement, it can be positioned in the bi-axial direction. In addition, the class also have some bearing self-aligning capability, when compared to shell hole tilt 2 'to 10', still work, but have a certain influence on bearing life. Deep groove ball bearing cage mostly steel stamping Ribbon Cage, a large multi-use vehicle system for metal bearing solid cage.
   We recommend the following models: 6206-2ZNR bearing 36207B bearing RASEY50-N bearing HR31321J bearing 6208-2RS bearing 71832CD / HCP4A bearing 231 / 750EW33K bearing TLA3516UU bearing 7010ACD / DB bearing bearing CRM22A bearings 32052X 239 / 850K bearing NSK 6028DD bearing
   I also recommend NSK 6028DD bearing purposes: fume purification equipment, water-cooled chillers, air purification equipment, ordinary type cooling towers, waste incinerators, cross-flow cooling tower, trash, plating freezer, solid waste treatment equipment , wet cooling towers, construction machinery parts, refrigerator, double girder cranes, air-cooled refrigeration machines, drilling machines, and other purposes.
   nsk bearing lubrication:
   Oil bath 1. NSK Bearings smooth
    Smooth oil bath is the most common NSK Bearings in smooth manner, suitable for low and medium-speed bearing smooth. The NSK Bearings by a local dip tank, lubricating oil by the rotating bearing parts brought up, and then flow back into the oil tank should be slightly lower than the lowest rolling element center.
   2. NSK Bearings drip smooth
    Suitable drip smooth need constant supply lubricating oil was NSK bearing member, the amount of the individual drip drop every 3-8 seconds is appropriate, too much oil will cause the bearing temperature increased.
   Cycle oil smooth 3. NSK Bearings
    The filtered oil pump oil recommended for admission to NSK bearing member through the bearing lubricating oil and filtered after cooling use. Because circulating oil heat can be taken away, the bearing cooling, therefore the method useful in high speed bearing member.
   4. NSK Bearings smooth spray
    With dry air through the spray and the contraction of smooth oil mist mixed result, radioactive NSK bearings, air bearings can effectively cool and avoid intrusion of impurities. This method is suitable for high-speed, low-temperature smooth bearing member.
   5. NSK Bearings smooth radiation
    The low-pressure oil pump oil through the nozzle strikes NSK bearings, bearing the incident through the other end of the bearing oil flowing into the oil sump. When the high-speed rotating bearings, rolling elements and maintain aircraft also commensurate with the high rotational speed so that the ambient air stream caused by an individual is difficult to smooth the way lubricating oil to the bearings, then you must use low-pressure radiation will smooth the way oil spray to the bearing, the nozzle position should be placed between the inner and the maintenance of the central rack.

please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement