please contact sales@tanchin.hk for any inquiry
I also sell: 4T-JHM318448 / JHM318410 bearing 23172CAC / W33 bearings NJ2224 bearings 22315-E1-K-T41A + AHX2315G bearing RNA4914 bearings 7036DF bearing 52318 bearings 2303-TVH bearing CRBF8022AD bearing K90 × 98 × 25 Bearings 53407 Bearing 2 × 7238BCBM bearing HCB71912-C-2RSD-T-P4S bearing 17118/244 bearing bearings 61808-2RS
   FAG Bearing Shenzhen 609DD bearing NSK sample diagram
[NSK 609DD bearing Specifications] Size:
Bearing Type: 609DD bearing
Inner diameter: 9 mm
Outside diameter: 24 mm
Thickness: 7.0 mm
Bearings: miniature deep groove ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported bearings Japan IKO

   We recommend the following models: JM511910 bearings 6216-RS bearing 869/854 Bearings C4032K30 + AH24032 Bearing 22326B bearing 32310JR bearings NA6906 NA4876 bearing bearing 22236B bearing 7209C / DB bearing bearing K20X26X12 FBSA207 / DF bearing NSK 609DD bearing
   I also recommend NSK 609DD bearing purposes: chuck, chemical laboratory equipment, woodworking tools, broken equipment, presses, ball mill, combined machine, hoist, slotting, bucket elevator, casting machine tools, chip conveyor, planer, mine construction equipment, forging machine, and other purposes.
   nsk bearing lubrication:
   Oil bath 1. NSK Bearings smooth
    Smooth oil bath is the most common NSK Bearings in smooth manner, suitable for low and medium-speed bearing smooth. The NSK Bearings by a local dip tank, lubricating oil by the rotating bearing parts brought up, and then flow back into the oil tank should be slightly lower than the lowest rolling element center.
   2. NSK Bearings drip smooth
    Suitable drip smooth need constant supply lubricating oil was NSK bearing member, the amount of the individual drip drop every 3-8 seconds is appropriate, too much oil will cause the bearing temperature increased.
   Cycle oil smooth 3. NSK Bearings
    The filtered oil pump oil recommended for admission to NSK bearing member through the bearing lubricating oil and filtered after cooling use. Because circulating oil heat can be taken away, the bearing cooling, therefore the method useful in high speed bearing member.
   4. NSK Bearings smooth spray
    With dry air through the spray and the contraction of smooth oil mist mixed result, radioactive NSK bearings, air bearings can effectively cool and avoid intrusion of impurities. This method is suitable for high-speed, low-temperature smooth bearing member.
   5. NSK Bearings smooth radiation
    The low-pressure oil pump oil through the nozzle strikes NSK bearings, bearing the incident through the other end of the bearing oil flowing into the oil sump. When the high-speed rotating bearings, rolling elements and maintain aircraft also commensurate with the high rotational speed so that the ambient air stream caused by an individual is difficult to smooth the way lubricating oil to the bearings, then you must use low-pressure radiation will smooth the way oil spray to the bearing, the nozzle position should be placed between the inner and the maintenance of the central rack.


please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement